Kenwood XXV-01D - Manual (Page 27)

English | 27
7 Exit display control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
• When you selected the Display Type B display, select
an easy viewable font color.
• The "Indicator" item of Display type C/D can be set;
however, the actual display color does not change.
• This function can be set for each display type.
External Display Switching
Changing the display in the connected External
Display.
1 Show the Multi-function display
Press the [NEXT] button repeatedly until
"Display" appears.
Refer to <Notes on Multi-function System> (page
9).
2 Enter display control mode
Turn the [VOL] knob to select "Display".
Press the [VOL] knob.
3 Enter External display select mode
Turn the [VOL] knob to select "OEMDISP".
Press the [VOL] knob.
"OEM Display Out" is displayed.
4 Select the display
Push the Control knob towards [ 4] or
[ ¢].
5 Exit display control mode
Turn the [VOL] knob to select "Return".
Press the [VOL] knob.
TEL Mute
The audio system automatically mutes when a
call comes in.
When a call comes in
"Call" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "Call" display disappears and the audio
system comes back ON.
When the call ends
Hang up the phone.
The "Call" display disappears and the audio
system comes back ON.