Kenwood SIRIUS KTC-SR901 - Manual (Page 2)

KTC-SR902/KTC-SR901 SIRIUS
®
Satellite Tuner
Quick-Start Guide for:
KDC-X569/KDC-X469/
KDC-MPV6022/KDC-MPV622/KDC-MP522/KDC-4022/
KDC-422/KDC3022/KDC-322
XXXX
Step 1: Get your unit’s individual Electronic
Serial Number (ESN):
a) Press the SRC button ( ) repeatedly until
“SIRIUS” appears on the display
b) Hold the MENU button ( ) until “MENU”
appears on the display
c) Press the AM/FM buttons ( ) to scroll through
the options until “ESN XXXXXXXX” appears on
the display
d) Write the number down
e) Press the SRC button (
) to exit
Step 2: Subscribe to SIRIUS Satellite
a) Make sure your vehicle has the stereo on and the
SIRIUS antenna has a clear view of the sky with
no obstructions (buildings, garage, etc.)
b) Have your Vehicle Identification Number (VIN)
from the vehicle that the radio is installed in.
c) Have your unit’s ESN and your credit card
number handy
d) Contact SIRIUS on the web at siriusradio.com or
call toll-free: 1-888-539-SIRIUS (7474)
e) The operator will instruct you further
• Your tuner should be able to receive SIRIUS
Satellite signals almost immediately after you
subscribe
Searching for SIRIUS categories:
1) Press the PLAY/PAUSE button ( ) to enter the
Category Search mode.
2) Use the FM and AM buttons ( ) to search
through the available program categories
3) Press the PLAY/PAUSE button ( ) again to exit
the Category Search mode.
Direct access tuning (using the remote):
1) Press the DIRECT/OK button on the remote control
2) Use the remote’s number buttons to enter the
stream number
3) Press the >>I button ( ) to go to that stream
Switching the Seek mode:
1) Use the I<< and >>I buttons ( ) to seek streams
2) Press the AUTO button ( ) to cycle the Seek
mode between:
• Preset Seek (Seek through your presets)
• Channel Seek (Seek the next stream)
Setting stream presets:
1) Use the FM button ( ) to select the preset bank
2) Use the I<< and >>I buttons ( ) to select the
stream you want to memorize
3) Hold the preset button ( ) you want to
memorize the stream in for at least 2 seconds
• When the stream is stored the preset number
display will flash once
• Each preset button can store a different preset
stream for each preset bank
Changing the Display mode:
Press the DISPLAY button ( ) button to cycle
through the following display options: Artist,
Stream Number, Category Name, Stream Name,
Song Title
KTC-SR902/KTC-SR901 SIRIUS
®
Satellite Tuner
Quick-Start Guide for:
KDC-X969/KDC-X869/
KDC-X769/KDC-MP922/KDC-MP822/KDC-V7022/KDC-722
Step 1: Get your unit’s individual Electronic
Serial Number (ESN):
a) Press the SRC button ( ) repeatedly until
“SIRIUS” appears on the display
b) Press the MENU button ( ) until “MENU”
appears on the display
c) Press the AM/FM buttons ( ) to scroll through
the options until “ESN XXXXXXXX” appears on
the display
d) Write the number down
e) Press the SRC button (
) to exit
Step 2: Subscribe to SIRIUS Satellite
a) Make sure your vehicle has the stereo on and the
SIRIUS antenna has a clear view of the sky with
no obstructions (buildings, garage, etc.)
b) Have your Vehicle Identification Number (VIN)
from the vehicle that the radio is installed in.
c) Have your unit’s ESN and your credit card
number handy
d) Contact SIRIUS on the web at siriusradio.com or
call toll-free: 1-888-539-SIRIUS (7474)
e) The operator will instruct you further
• Your tuner should be able to receive SIRIUS
Satellite signals almost immediately after you
subscribe
Searching for SIRIUS categories:
1) Press the NEXT button ( ) repeatedly until
“CS-”, “CS+”, “CH-”, and “CH+” are displayed
above the [1 – 6] buttons (
).
2) Use the CS- and CS+ buttons ( ) to search
through the available program categories
• You must wait until all category information is
acquired before operating this function again
Direct access tuning (using the remote):
1) Press the DIRECT/OK button on the remote control
2) Use the remote’s number buttons to enter the
stream number
3) Press the >>I button ( ) to go to that stream
Switching the Seek mode:
1) Use the I<< and >>I buttons ( ) to seek streams
2) Press the AUTO button ( ) to cycle the Seek
mode between:
• Preset Seek (Seek through your presets)
• Channel Seek (Seek the next stream)
Setting stream presets:
1) Use the FM button ( ) to select the preset bank
2) Use the I<< and >>I buttons ( ) to select the
stream you want to memorize
3) Press the NEXT button ( ) repeatedly until
“1” – “6” are displayed above the [1 – 6]
buttons (
).
4) Hold the preset button ( ) you want to
memorize the stream for at least 2 seconds
• When the stream is stored the preset number
display will flash once
• Only the preset number, not the category
information is stored
• Each preset button can store a different preset
stream for each preset bank