Kenwood SIRIUS KTC-SR901 - Manual (Page 6)

KTC-SR902/KTC-SR901 SIRIUS ® Satellite Tuner
Quick-Start Guide for:
KVT-M700
Step 1: Get your unit’s individual Electronic
Serial Number (ESN):
a) Press the SRC button ( ) repeatedly until
“SIRIUS” appears on the display
b) Touch the INFO button ( ). The Information
screen will appear.
c) Touch “ESN”. The ESN number will appear on
the display
d) Write the number down
e) Press the SRC button (
) to exit
Step 2: Subscribe to the Sirius Satellite
Radio service
a) Make sure your vehicle has the radio "ON" and
the antenna has a clear view of the sky with no
obstructions (buildings, garage, etc.)
b) Have your Vehicle Identification Number (VIN)
from the vehicle that the radio is installed in.
c) Have your unit’s ESN and your credit card num-
ber handy
d) Contact SIRIUS on the web at siriusradio.com or
call toll-free: 1-888-539-SIRIUS (7474)
e) The operator will instruct you further
• Your tuner should be able to receive Sirius
Satellite Radio signals almost immediately after
you subscribe
Searching for program categories and
streams:
a) Press the SRC button ( ) repeatedly until
“SIRIUS” appears on the display
b) Touch SRCH ( ). The Search screen will
appear.
c) Use the up/down arrow buttons to search
through the available program categories
d) Touch the category you want. The available sta-
tions will appear.
e) Touch the stream you want to listen to
• If there are no streams available in a category, the
tuner will automatically switch to the next category
Display settings setup:
a) Press the SRC button ( ) repeatedly until
“SIRIUS appears on the display
b) Touch the INFO button ( ). The Information
screen will appear.
c) Touch the information you want and it will
appear on the screen
Setting stream presets:
a) Touch and hold buttons 1-6 ( ) after tuning to
the desired stream