6 - sealing the cable access hole, 4 - activating the ird, Your ird. refer to – KVH Industries TracVision S3 User Manual
Page 26: Section 2.4, Activating the ird, For more, 4 activating the ird, 6 sealing the cable access hole
2.3.6 Sealing the Cable Access Hole
Once the RF and data/power cables are connected to the
antenna, you need to seal and cover the cable access hole to
protect against leakage.
1. Completely seal the cable access hole with silicone
sealant or RTV.
2. Install the clamshell ventilator, supplied in the
kitpack, over the cable access hole using the three
supplied #6 screws (see Figure 2-19).
2.4
Activating the IRD
DIRECTV and DISH Network IRD Activation
KVH makes it easy to activate your DIRECTV or EchoStar (DISH
Network) IRD. Just call KVH at 1-888-584-4163 and ask for IRD
Activation
(Monday - Friday, 8:30 a.m. - 5:00 p.m. EST). For other
options, please refer to the user manual that accompanied your
IRD.
Other IRD Activations
Please refer to the user manual that accompanied your IRD for
activation instructions.
2-15
Installation
54-0157 Rev. G
Clamshell
Ventilator
#6 Screws
Cable Access Hole
(in Roof of Vehicle)
RF & Data/Power
Cables
To
TracVision
Antenna
Figure 2-19
Installing the Clamshell Ventilator
Ensure the clamshell mounting
screws do not puncture the cables
inside the vehicle.