KVH Industries TracVision S3 - Manual (Page 45)

Conical Scan Tracking (TracVision L3 only)
The antenna control unit uses conical scanning to maintain peak
signal strength to the receiver and to update the satellite’s
position. When conical scan tracking is active, the antenna moves
continually with a circular motion to sweep across the satellite’s
peak signal. The signal strength is then fed back to the control
circuits to keep coming back to the direction of the strongest
signal.
If the satellite signal is lost while the system is in conical scan
track mode, the control software imposes a 45-second time-out
delay. If the signal is not regained during that time, the antenna
reverts to the set of Search Modes to start looking for the satellite
signal. This is an automatic process that does not require user
intervention.
3.4 Internet Access
Your TracVision L3/S3 can receive high-speed Internet data when
used in conjunction with KVH’s TracNet 2.0 Mobile High-speed
Internet System. With TracNet 2.0, you get broadband Internet
access on the road via satellite downloads and a wireless return
path. For more information about TracNet 2.0 in North America
and Europe, please visit our web site at
www.kvh.com .
3-7
Using Your TracVision L3/S3
54-0157 Rev. G