5 - maintenance, 1 - warranty/service information, 2 - preventive maintenance – KVH Industries TracVision S3 User Manual
Page 51: As part of preventive maintenance (described in, Section 5, Maintenance, Kvh recommends checking the antenna unit, Section 5, “maintenance, 5maintenance, 1 warranty/service information
5-1
Maintenance
54-0157 Rev. G
5
Maintenance
5.1
Warranty/Service Information
For information on KVH warranty, repair, and liability policies,
please refer to the
provided at the
conclusion of this manual. If you have any questions, please call
your local authorized dealer/installer or distributor, or contact
KVH or KVH Europe directly.
5.2
Preventive Maintenance
TracVision L3/S3 requires minimal preventive maintenance. The
following tasks are sufficient to maintain peak performance.
Monthly
•
Wash the exterior of the radome and baseplate
assembly with fresh water; a mild detergent may
be added to remove grime. Do not spray the
radome directly with high-pressure water.
•
Do not apply abrasive cleaners or volatile solvents
such as acetone to the ABS radome.
Annually
•
Remove the radome and examine the interior of
the antenna unit for signs of corrosion, loose
connections, or frayed or broken wires.
•
Visually inspect the elevation drive shaft to be
certain that it moves easily and is clear of grit and
debris.
When cleaning the radome, avoid
any compounds that react with
plastic.