Konica Minolta Magicolor 2590 MF - Manual (Page 32)

Specifying Settings in Configuration Menu 26
Specifying Settings in Configuration Menu
General Procedure for Specifying Settings in
Configuration Menu
1
With the Fax mode screen displayed, press the Menu Select key to enter
the configuration menu.
2
Check the name of the menu in the upper line, press the + or , key to
select the desired menu, and then press the Menu Select key to specify a
setting for an option in the displayed menu.
"
Refer to the menu configuration on page 12 to display the desired
menu. After the name of the desired menu is displayed, press the
Menu Select key.
"
The desired menu can also be displayed by pressing the key in the
keypad for the corresponding number.
Example: To display “Buzzer Volume”, press the 6 key in the
MACHINE SETTING screen.
For the number assigned to each menu option, refer to the menu
configuration on page 12.
3
To select a setting, press the * or ) key.
If + or , appears in the screen displaying the settings, press the + or ,
key until the desired setting is displayed.
To enter a setting, use the keypad to type in the number.
4
Press the Menu Select key.
The setting is applied, and the Fax mode screen appears again.
"
To cancel the settings, press the Cancel/C key.