Konica Minolta Magicolor 2590 MF User Manual

Page 45

Advertising
background image

Specifying Multiple Recipients

39

4

Check that the BROADCAST screen appears, and then press the Menu
Select
key.

5

Specify the fax number of the recipient. Repeat the appropriate operations
described below until all recipients have been specified.

Direct dialing: Enter the fax number of the recipient directly using the
keypad. Press the Menu Select key, and then specify the next recipi-
ent.

Using the one-touch dial keys (including group dialing): Press the
one-touch dial key programmed with the desired fax number. Press
the Menu Select key, and then specify the next recipient.

Using the speed dial numbers: Press the Speed Dial key, and then
use the keypad to enter the 3-digit speed dial number programmed
with the desired fax number. Press the Menu Select key, and then
specify the next recipient.

Using the phone book functions: Press the Speed Dial key twice, and
then select either “LIST” or “SEARCH” to select the desired fax num-
ber. (Refer to “Using the List Function of the Phone Book” on page
36.) Press
the Menu Select key, and then specify the next recipient.

6

Press the Start key.
A message appears, allowing you to select whether or not to check the
recipients.

7

To check the recipients, press the Menu Select key.
The recipients specified in step 5 are displayed in the order that they were
selected.

"

If you do not want to check the recipients, skip to step 10.

8

Check the recipient, and then press the Menu Select key. The next recip-
ient is displayed.

"

If you want to delete the displayed recipient, press the Cancel/C key.

9

After all recipients have been checked, “Fin.=START” appears in the mes-
sage window.

10

Press the Start key to begin scanning and sending the fax.

"

To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select “Yes”,
and then press the Menu Select key. If this is done, all selected recip-
ients are cleared.

"

During transmission, the message “SET DOCUMENT” appears; how-
ever, the document is sent to all specified recipients after being
scanned only once.

Advertising
This manual is related to the following products: