Kambrook PROFILE KSC450 User Manual

Page 4

Advertising
background image



Do not place anything, other than the lid, on

top of the Kambrook Profile Slow Cooker

when assembled, when in use and when

stored.
Always switch the Kambrook Profile Slow

Cooker to the OFF position, then switch off

at the power outlet, then unplug and allow to

cool, if appliance is not in use, before cleaning,

before attempting to move the appliance,

dissembling, assembling and when storing the

appliance.
Keep the appliance clean. Follow the cleaning

instructions provided in this book.

IMPORTANT SAFEGUARDS FOR ALL
ELECTRICAL APPLIANCES

Fully unwind the power cord before use.
Do not let the power cord hang over the edge

of a bench or table, touch hot surfaces, or

become knotted.
To protect against electric shock, do not

immerse the power cord, power plug or

stainless steel housing in water or any other

liquid.
This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they

have been given supervision or instructions

concerning use of the appliance by a person

responsible for their safely.
Children should be supervised to ensure that

they do not play with the appliance.
This appliance is for household use only. Do

not use this appliance for anything other

than its intended use. Do not use in moving

vehicles or boats. Do not use outdoors.

Misuse may cause injury.
It is recommended to inspect the appliance

regularly. Do not use the appliance if the

power cord, power plug or appliance becomes

damaged in anyway. Return the entire

appliance to the nearest authorised Kambrook

Service Centre for examination, and/or repair.
Any maintenance other than cleaning should

be performed at an authorised Kambrook

Service Centre.
The installation of a residual current device

(safety switch) is recommended to provide

additional safety protection when using

electrical appliances. It is advisable that a

safety switch with a rated residual operating

current not exceeding 30mA be installed in

the electrical circuit supplying the appliance.

See your electrician for professional advice.

CAUTION: HOT SURFACES DURING

AND AFTER USE.


KSC450_V3.indd 4

12/11/08 4:15:33 PM

Advertising