Kenwood KCA-BT300 - Manual (Page 22)

22 | KCA-BT300
In Standby mode
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1 Select the Bluetooth device selection mode
during Menu mode
Cell-phone
Select the "Phone Selection"/ "PHONE SEL"/ "PHN-
SEL" display.
Audio player (excluding Model-D)
Select the "Audio Selection"/ "AUD-SEL" display.
2 Enter the selected Bluetooth device selection
mode
Press the decision button for at least 1 second.
'(name)' is displayed.
3 Select the Bluetooth device
Operation type Operation
Selects the Bluetooth
device Push the selection button towards up
or down.
Set up the Bluetooth device Push the selection button towards right
or left.
' ✱(name)' or '-(name)' is displayed.
" ✱" (dark color) or "✱": The selected cell-phone is
busy.
"
✱" (light color) or "_": The selected cell-phone is
on standby.
" " (blank): The cell-phone is deselected.
☞ If a cell-phone is already selected, deselect it, and then
select a different one.
4 Exit the Bluetooth device selection mode
Exit Menu mode.
⁄
• For Model-D, F, and G, the firmware version "BT300 FW
***" is displayed at the end of the Bluetooth device list.
For how to update the firmware, access our website.
http://www.kenwood.com/cs/ce/bt/
• For Model-G, the audio player is displayed on the device
list after the registration. However, the audio player on
the list cannot be selected.
In Standby mode
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1 Select the Bluetooth device deletion mode
during Menu mode
Select the "Device Delete"/ "DEVICE DEL"/ "Phone
Delete"/ "PHN-DEL" display.
2 Enter the Bluetooth device deletion mode
Press the decision button for at least 1 second.
'(name)' is displayed.
3 Select the Bluetooth device you wish to delete
Push the selection button towards up or down.
4 Delete the selected Bluetooth device
Model-A, B, D, F, G-1, G-3:
Press the decision button for at least 1 second.
Model-C:
Press the decision button.
Model-E, G-2:
4-1. Press the decision button.
4-2. Push the selection button towards right to
select "YES"/"Y".
4-3. Press the decision button.
5 Exit the Bluetooth device deletion mode
Exit Menu mode.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
• For Model-D, F, and G: The firmware version "BT300 FW
***" is displayed and cannot be deleted.
Function of Model-A, B, C, D, E, F
Adding a Voice Dialing Command
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.
1 Entry the voice tag mode
Select the "NAME MEM"/ "PB Name Edit"/ "Name
EDT" display.
Model-A, B, C, D, F:
Press the decision button for at least 1 second.
Model-E:
Press the decision button.
2 Search for the name to register
Select the name to register with reference to 2-3 in
<Calling a number in the Phone Book>.
Function Operation