Kenwood KCA-BT300 - Manual (Page 7)

English | 7
Receiving a call
Answering a Phone Call
Press the [AUD] knob or one of [1] – [6] buttons
☞ Inserting a disc such as a CD will disconnect your call.
Rejecting an Incoming Call
Press the [SRC] button.
Call waiting
Answering Another Incoming Call with the
Current Call Suspended
1. Press the [AUD] knob.
2. Turn the [AUD] knob. Select the "ANSWER" display.
3. Press the [AUD] knob.
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.
Continuing the Current Call
1. Press the [AUD] knob.
2. Turn the [AUD] knob. Select the "REJECT" display.
3. Press the [AUD] knob.
Answering the Waiting Call after Terminating the
Current Call
Press the [SRC] button.
Switching between the Current Call and Waiting
Call
Press the [AUD] knob.
During a call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode ( )
Press the [AUD] knob for at least 1 second.
Switches between Private talk ("PV TALK") or Hands-
free talk ("HF TALK") when pressed.
Adjusting the Voice Volume during a Call
Turn the [AUD] knob.
Other functions
Clearing the Disconnection Message
Press the [DISP] button for at least 1 second.
Switching between Display Modes
Press the [DISP] button. You can switch between the
Phone Book and the Call List.
Registering to the Preset Dial Number List
1. Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dial a number/ Calling a number in the call log/
Calling a number in the Phone Book
2. Select the button you wish to register
Press the [1] – [6] button for at least 2 seconds.
3. Exit the dialing method selection mode
Press the [MENU] button.
Items Set in Menu mode
* To enter the Menu mode, press the [AUD] knob for
at least 1 second.
Display Setting overview
"DVC REGIST"*/
"DVC REG"* Register a Bluetooth device (pairing). See page 20.
"S-DVC SELECT"*/
"SDVC SEL"* Allow registration of a special device that cannot be
registered normally. See page 21.
"PHONE SEL"*/
"PHN-SEL"* Select a cell-phone subject to hands-free connection.
See page 22.
"AUDIO SEL"*/
"AUD-SEL"* Select the audio player to be connected. See page 22.
"DIALING MODE"*/
"D.MODE"* Select a dialing method. See page 6.
"SMS DOWNLOAD"*/
"SMS DL"* Download a short message. See page 24.
"SMS INBOX"*/
"INBOX"* Display the received short message. See page 24.
"VOICE TAG"*/
"VOICETAG"* Register the voice tag for "voice recognize". See page 22.
"VOICE RECOG"*/
"V-RECOG"* Make a voice dialing call. See page 6.
"DEVICE DEL"*/
"DVC-DEL"*/
"PHN-DEL"* Cancel registration of the Bluetooth device. See page 22.
"DVC-STATUS"/
"D-STATUS" "HF-CONNECT"/ "AD-CONNECT"/ "BAT"/ "SGNL":
Display the status of the Bluetooth device. See page 30.
"PIN EDIT"* Specify the PIN code required when registering this unit
using the Bluetooth device. See page 21.
"AUTO ANS"/
"ANS" "OFF"/ "0" – "99": Answer a call automatically after
lapse of the preset time interval for automatic answer.
See page 30.
"SP SEL"/
"SPK" "FRT"/ "F-R"/ "F-L": Specify the voice output speaker.
See page 30.
"CALL BEEP"/
"C-BP" "ON"/ "OFF": Output a beep from the speaker when a
call comes in. See page 30.
"BT FW UP" For how to update the firmware, access our website.
http://www.kenwood.com/cs/ce/bt/