Konica Minolta X50 - Manual (Page 81)

81
CONNECTING TO WINDOWS 98 AND 98SE
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be installed manually with the operating system’s add-new-hardware wizard; see
the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the
accompanying instructions on the screen. No special driver software is required for other
Windows operating systems.
Before connecting the camera to the
computer, place the DiMAGE Viewer
CD-ROM in the CD-ROM drive. The
DiMAGE installer menu should
automatically activate. To
automatically install the Windows 98
USB driver, click on the “Starting up
the USB device driver installer”
button. A window appears to confirm
that the driver should be installed;
click “Yes” to continue.
Automatic Installation
A message appears when the driver
has been successfully installed. Click
“OK.” Restart the computer before
connecting the camera (p. 80).