Konftel 200 - Manual (Page 10)

Calling
Konftel 200 • User Guide
10
English
If the R key does not work
The requirements for the operation of the R key vary between PBXs and
from country to country. Konftel 200 therefore lets you program the R-
pulse time so that it works with most PBXs on the market.
Programming the R key
(default setting = 2)
Enter the value for the R-pulse. The default set-
ting is 2. Check in the table below whether the
setting is right for your PBX/country.
Value: Time: PBX/country:
R1 65 ms Ericsson MD110
R2 100 ms Scandinavia, Europe
R3 150 ms Reserved
R4 270 ms Germany, France, Israel
R5 600 ms USA
Press the OK key to save the settings and exit.
Select Special Settings menu.
Press OK.
Choose R-function.
Press OK.
Press Menu.
R-function
R2