Konftel 200 - Manual (Page 22)

Troubleshooting
Konftel 200 • User Guide
1. Check that the microphone is on during the call.
The green microphone indicators must be lit.
2. Check that Konftel 200 is connected between
an analogue telephone jack and the telephone
line input underneath the Konftel 200.
3. Bypass any extension cables and check whether
the system is functioning correctly. If not,
contact your dealer.
4. Disconnect the extra microphones and see if the
system works without them. If not, return all
units for service.
5. If Konftel 200 must wait for a second dial tone,
you should insert a pause with the Mute/Pause
key when entering telephone numbers in the
Phonebook.
Clean the equipment with a dry, soft cleaning cloth.
Do not use any liquids!
Troubleshooting
and maintenance
22
English
Maintenance