Kenwood LZ-800W - Manual (Page 7)

7
Setting the Touch Sensor Tone [BEEP]
Touch [ ON ] or [ OFF ] to switch the function on
and off.
[ON]: Touch sensor tone is turned on
[OFF]: Touch sensor tone is turned off
Touch [ 2 ] to return to the system setting screen-1.
Touch [ RTN ] to return to the setup menu screen.
The touch panel can be adjusted if the position
touched and the operation performed do not
match.
Press the SCRN button for at least one second to
switch to the setup menu screen.
Touch [ TOUCH ] to switch to the touch panel
adjustment screen.
Accurately touch the mark at the lower left and the
mark at the upper right, following the instructions in
the messages.
When the mark at the upper right is touched, the
adjustment is completed and the system setup menu
screen reappears.
• If [ CANCEL ] is touched without touching the button
at the lower left, the adjustment is cancelled and the
screen that was set before switching to the system
setup menu reappears.
• If [ CANCEL ] is touched after touching the button at
the lower left, the button at the lower left reappears.
• If [ RESET ] is touched, the settings are reset to the
factory defaults and the setup menu screen
reappears.
Select the area for video broadcast viewing.
Press the SCRN button for at least one second to
switch to the setup menu screen.
Touch [ TV AREA ] to switch to the TV area setting
screen.
Selecting the Preset Bands
Touch [ TV 1 ] or [ TV 2 ]. The preset band switches
between TV1 and TV2.
Selecting the Reception Area
Touch [ 1 ] - [ 5 ] to select the channel setting for
your country as follows:
Touch [ RTN ] to return to the setup menu screen.
The reception area can be set for two separate preset
bands, TV1 and TV2.
NOTE
5
4
3
2
1
Selecting the Reception Area
(When the KTC-V800P is connected)
NOTE
3
2
1
Adjusting the Touch Position
4
NOTE
China
Singapore
Malaysia
Thailand
Burnei
Hong Kong
Indonesia
Australia
PAL-D ■ 1
■ 2
■ 3
■ 4
■ 5
PAL-B/G
PAL-I
PAL-B/G
R E S E T C A N C E L
T O U C H P A N E L A D J U S T
P l e a s e T o u c h
t h e C e t e r o f
t h e B u t o n i n
L e f t - B o t t o m C o r n e r
n
t t h e
RTN T V A R E S A E T
1 2 3
4 5
T V 1
C h i n a •
T V 2
RTN S E T U P
S Y S T E M T O U C H
Setup Menu Screen < Video Box Unit or KTC-V800N>
RTN S E T U P
S Y S T E M
T V A R E A
T O U C H
Setup Menu Screen < KTC-V800P >
LZ_800W_English_ver4 02.12.16 1:17 PM Page 7