Kathrein UFS 922 si - Manual (Page 70)

70
Premium EPG
Recording “User-Defined”
Use the

buttons to select the “user-defined”
recording mode (see screenshot on the right).
Use the

buttons to switch to the “Day” field and
use the

buttons to select the required day for
the recording. Press the

button to fix the selection
(the day will be shown in red).
If necessary the receiver will suggest some days to you;
you can accept these suggestions or deactivate them
using the cursor buttons and pressing the

button.
Use the

buttons to switch to the “Start” field and use the

buttons or the number buttons to select the desired
recording start time. Use the

buttons to switch to the “End” and field use the

buttons or the numeric keypad
to select the desired recording end time.
When all settings have been made, press the

button to save the recording settings.
“Series Recording”
Use the

buttons to select the “Series recording”
recording mode (see screenshot on the right).
For series recording the receiver automatically takes the
start and end of recording from the EPG data.
Press the

button to save the recording settings.
Instructions for recording a series:
If the “Series recording” function is used to program recording of every edition or episode of a series, the EPG will
locate the series in question on the updated schedules and automatically program the recording of them. A change in
the time the series is broadcast is no problem for the EPG, as its programming is based on the series title.
This does, however, mean that the schedule change needs to have been notified prior to the last update of the EPG.