Kathrein UFS 922 si - Manual (Page 95)

95
Copying to USB data carrier
Use the

buttons to select “Copy to USB Device” and confirm your selection with the

button. The following
display appears (example):
The connected USB data carrier must
be “FAT/FAT 32” formatted.
Successful
USB data carrier
initialisation is indicated by the “USB”
and “HDD” symbols on the front
display. If both symbols are lit, the data
carrier can be used.
Use the

buttons to select the desired storage
location here.
Then press the

button to start the copying operation. The progress of the copying is shown in the channel
information (called up using the

button from the TV picture), see example screenshot below.
A USB storage medium or partition
with insufficient memory capacity is
marked in red (see example screenshot
on right). It is not possible to copy the
selected recording(s) to this storage
location. Select a storage location with
sufficient space (displayed in black).
Recording archive (play back/edit recordings)