Kathrein UFS 922 si - Manual (Page 105)

105
Main menu - Service menu
After calling up the menu you will see the following display:
You can choose between various different menus:
- Automatic Software Update
- Software Update
- Software update by USB
- Factory Reset
In addition, the following information is displayed in the
service menu under the “Factory Reset” option:
- Operating software version currently in use on the
receiver
- Date of the last update of the channel list
- Date of the last update of the receiver operating
software
Use the

buttons to select the desired menu and confirm your selection using the

button.
Automatic Software Update
Select the required setting (On/Off) using the

buttons.
Setting “Off”:
The receiver does not automatically search for new software available every day when updating the data and
does not compare the channel list you have stored on the receiver with the delta channel list transmitted. However,
you can perform a software update manually at any time, as described under “Software update”.
Setting “On”:
The receiver automatically searches for new software available every day when updating the data and does
compares the channel list you have stored on the receiver with the delta channel list transmitted. Your channel list is
not overwritten, only updated. For example, if the name or frequency of a channel changes, the old parameters
for the affected channel are replaced by the new ones in your channel list on the receiver. The channel is not moved
in the channel list. New channels that have not yet been saved in your channel list are added to the end of the list.
Channels that are no longer broadcast are deleted.
Note:
The receiver does not make the changes automatically without your approval, they are buffered until the
next time the receiver is started.