Kenwood HM-DV6MD - Manual (Page 78)

78
MD Edit Functions
Application section
Select "ERASE".
Erasing a single track
(ERASE)
Execute the track erasure operation.
1
Press the TRACK EDIT key.
2
Select "ERASE".
3
Set it.
Play the track to be erased.
Select the "MD" input ⁄
During playback, it is possible to erase only the track being played. The track numbers of the tracks after
the erased track will be adjusted.
1
2
3
ENTER
Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.
Display after execution
"EDIT NOW"
= "COMPLETE"
(When editing is completed successfully)
"EDIT NOW"
= "CAN' T EDIT"
(When editing is impossible)
SET
4 ¢
P.CALL
After editing, eject and remove the MD.
4
MD 0
Each press of the
4 or ¢ keys switches the op-
eration.
1 "DIVIDE"
2 "COMBINE"
3 "ERASE"
4 "MOVE"
÷ To cancel the operation in the middle, press the
TRACK EDIT key any time before step
3
.
TRACK EDIT
Information is
being written. MD has been ejected.
E R A S E
1 E 0 R A S E 0 o k
÷ The MD editing is established finally at the moment the
MD disc is ejected.
R I W T I N G
J E E C T
Do not turn power off or apply shock or impact while
"WRITING" is displayed. If the power cord is un-
plugged before "WRITING" disappears, the recorded
or edited data will be lost.