Assigning a title to a disc or track, Activate the title input mode – Kenwood HM-DV6MD User Manual

Page 80

Advertising

MD Edit Functions

Application section

Each press of the

4 or ¢ keys switches the op-

eration.

1 "DISC" : Disc title *1
2 "001", "002"..... : Track title *2
3 "ALL ERASE" : Complete erasure of disc

and track titles

4 "[1]", "[2]", "[3]": Title Memo *3

Activate the title input mode.

Press the TITLE INPUT key.

Select the title to be edited.

Set the title to be edited.

In case of track title :

Select the desired track No. (The track can also be
selected using the numeric keys.)

In case of disc title :

Select "DISC"

When titles are input in discs and tracks, the titles can be displayed when they are played back. The follow-

ing procedure can also be used to modify or erase input titles.

Assigning a title to a disc or track

Select the "MD" input

⁄

Up to 1792 characters can be input per disc and up

to 80 characters can be input per track. (In case of

alphanumeric and symbol characters)

A space (blank character) also required the same

amount of data as alphanumeric characters. When

deleting a title, it is not recommended to overwrite

spaces on previous characters but use the (CLEAR/

DELETE) function.

Total number of title characters

When step

1 - 1 is performed in stop mode, the dis-

play starts with the disc title.

Each press of the

4 or ¢ key displays a track title

in sequence from “001”, “002”.... When all track titles
have been displayed, 3 then 4 will be displayed.

Each press of the

4 or ¢ key causes the selected

title memo number to blink, after which 1 then 2 will
be displayed.

Before starting MD editing, be sure to cancel the pro-
gram mode by pressing the PGM key in stop mode.

TITLE INPUT

P.CALL

SET

To return

To advance

To abort operation, press the TITLE INPUT key
again.

÷ With a track without a title, the display shows "

List of registered symbols (ASCII codes):

! “ # $ % & ’( ) * + , - . / : ; < = > ` ? @ _ ˆ

I S

ч ч ч ч ч ч

0 1

ч ч ч ч ч ч

Disc titles can be assigned in stop mode. When the
MD

6 key pressed before step 1-3 while assigning

a title to a track, the title can be entered while listen-
ing to that track.

With an MD track recorded in the "LP2" or
"LP4" recording mode using the stamping
function, "LP:" will be input at the beginning
of the track title.

Press in stop mode

Advertising