1 - keyspan serial assistant, Keyspan serial assistant, Port emulation can turned on by using the – Keyspan 1.9 User Manual
Page 10: Emulation can turned on by using the, Located in control panels). when you open the
5.1 - Keyspan Serial Assistant
Besides the required drivers, the Keyspan High Speed USB Serial Adapter software installer
installs an application called Keyspan Serial Assistant. This application is used to:
• Determine the status of the adapter software and hardware
• Assist in problem solving
Launching the Keyspan Serial Assistant
To launch the Assistant, double click the "Keyspan Serial Assistant" icon in your Control Panels
folder. This will open the
window.
the Keyspan Serial Assistant window
The Keyspan Serial Assistant will display any Keyspan High Speed USB Serial Adapters
connected to your computer. If your Keyspan adapter hardware and software are installed correctly
you will see 'Driver and USA-19W Device found OK' or '...Renumerating...Done' in the Serial
Adapter Status text box. If you do not receive either of these messages, proceed
section in this manual.
Explanation of Assistant Features
The following is a description of all the relevant text boxes and menus found in the Keyspan Serial
Assistant. You can also obtain this information by selecting 'Show Balloons' in the Help menu
and moving the cursor over any item in the Assistant.
(continued on next page...)
Keyspan:High Speed USB Serial Adapter for Mac OS-v1.9 User Manual
This User Manual applies to the Keyspan High Speed USB Serial Adapter Software for Mac OS.
(rev 02may12JA)
Page 10