Keyspan 1.9 - Manual (Page 6)

Installing the Keyspan High Speed USB Serial Adapter Hardware
The following hardware installation instructions provide a basic overview on installing the Keyspan
High Speed USB Serial Adapter in a USB port. For detailed instructions on how to connect
USB devices your specific computer, please refer to the USB Device Install section in your
computer's user's manual.
Step 4 - Connect the USB cable to the Adapter (if necessary)
If your Keyspan adapter does not have an attached USB cable, attach the included USB cable into
the Keyspan adapter's USB port.
Step 5 - Connect the Adapter to your USB port
Attach the Adapter to your computer by connecting the Adapter's USB cable into any built-in USB
port on your computer or USB Hub. It is not necessary to turn off your computer when attaching
the Adapter.
Step 6 - Hardware Installation Complete!
Your Keyspan High Speed USB Serial Adapter is ready for use now that you have installed
hardware and software.
Please proceed to the Configuring Your Serial Device section in this manual for instructions on
what to do next.
Keyspan:High Speed USB Serial Adapter for Mac OS-v1.9 User Manual
This User Manual applies to the Keyspan High Speed USB Serial Adapter Software for Mac OS.
(rev 02may12JA)
Page 6