Kathrein 3 - Manual (Page 11)

11
C10200
Carrier Class CMTS
for highest requirements
The C10200 also offers all the many advan-
tages covered by all Casa DOCSIS 3.0
systems as described above. Furthermore,
this specific CMTS platform is specifically
designed to cater for the highest demands of
any network operator who requires the best
possible service availability to be secured.
All active functional units can be offered
with full redundancy under hot plug and play
conditions. Apart from the power supplies
and fan trays, this also covers the switch
and management unit and the down and
upstream modules. The 12 RU 19" housing
can be flexibly laid out with 12 down or
upstream modules. That would allow a con-
figuration of up to 704 downstream and
64 upstream channels. If symmetrically
configured, then up to 384 downstream and
384 upstream channels could be enabled.
The C10200 can be configured with two dif-
ferent module series.
The "Revision 1" hardware is a particularly
suitable option for small and medium-sized
nets which aim to make full use of all the
benefits offered by a Carrier Class CMTS. All
essential active components can be operated
redundantly, achieving maximum reliability.
The appeal of the"Revision 2" hardware lies
in its considerably higher packing density
and larger switch capacity. 10 GbE interfaces
ensure the highest possible data throughput.
This variant is the most cost-effective solu-
tion for medium-sized and large nets with full
or partial redundancy.
In the following the special features of this
system are listed.
• 19" housing,
12
RU
• 12 module slots,
in which any of the downstream
and upstream modules can be inserted
• Extensive redundancy possible for:
- PSU unit (in delivery scope)
- Fan tray (in delivery scope)
- Switch and management module,
(optional, 1+1 redundancy)
- Down and upstream modules
(optional, n+1 redundancy)
- Network ports (total of 12 ports on
switch and management module, in
delivery scope)
• Exchangeable fan tray units
• Dual PSU -48 VDC, redundancy operation
• Matching rectifier for 230 VAC operation,
optionally available:
- Rect-Shelf: Carrier for
up to four rectifier modules;
Design 19", 1 RU
- Rectifier: Rectifier module.
Note: To operate a C10200 platform, two
rectifier modules are required.