Kodak EX1011 - Manual (Page 46)

40 www.kodak.com/go/support
Troubleshooting and support
Printing error. ■ Make sure your printer is on and the USB cable is
securely connected (
page 13 ).
■ Check your printer for more info.
Time out occurred while printing. ■ Check cables and printer supplies. Print again.
Unable to create file. Device write
protected or full. The frame was unable to copy the picture.
■ Insert a different card or device ( page 5 ), or change
the picture location setting ( page 8 ).
■ Remove write protection, unlock card.
■ Delete pictures from card.
Disk full.
Unable to get dynamically
assigned IP address. DHCP (see Glossary) is not enabled at the router.
■ Make sure your router is properly configured and
DHCP is enabled.
■ Contact your system administrator or the person who
set up your wireless network.
Verify network settings. ■ Contact your system administrator or the person who
set up your wireless network.
Verify security code. You have network security turned on.
■ Enter the security code you created when you set up
your wireless network.
■ Contact your system administrator or the person who
set up your wireless network.
Write failed. Select another
location. The frame was unable to copy the picture.
■ Insert a different card or device ( page 5 ), or change
the picture location setting ( page 8 ).
Screen message Try one or more of the following