Kathrein UFD 580 - Manual (Page 43)

Hard Disk Recorder
43
You can allocate one or more satellites to each tuner (provided you
have a DiSEqC™ system).
In the “Loop” setting, you must connect one tuner output to the input
of the other.
The setting you select for “tuner input” will depend on your reception
system. In case of doubt, consult your specialist dealer so that you
can use your receiver optimally.
Recording
Your receiver also enables you to record encrypted programmes (with
or without a CAM and Smartcard).
For playback, the CAM and Smartcard must be inserted. Encrypted
recordings are identified by a $ sign in the hard disk contents.
In order to convert an encrypted recording into an unencrypted
recording, the relevant take must be selected in the hard disk contents
and started by pressing the

button.
Hard Disk Capacity
Please check that there is adequate hard disk capacity available
before every recording! Press

to view the hard disk contents
(programme guide) and the available hard disk capacity.