Kathrein UFD 580 - Manual (Page 44)

Hard Disk Recorder
44
Time-Shift Recording
If you cannot catch the beginning of a programme because you are
occupied with something else, you can watch the programme in time-
shift mode. You can start recording the current programme you are
watching by simply pressing the

button. The receiver switches to
hard disk mode.
The red “T” in the info bar indicates time-shift recording.
You see a freeze-frame image while the recording is running in the
background. For a short time “
R ” flashes at the top left of the TV
screen and the red standby LED on the front panel of the receiver
flashes.
To start time-shifted playback, press the

button. You can control
the recorder fast forward, rewind, pause and playback functions with
the corresponding buttons. When you press the

button the TV
picture freezes, but the recording continues in the background. Press

again to resume.
You can hide the control console by pressing

.
You can also view a current programme. To do this, stop playback by
pressing the

button and quit hard disk mode with the

button.
You will be asked if you want to stop the recording. Press

again to
switch to TV mode without interrupting the recording.