Kathrein UFD 580 - Manual (Page 22)

Channel List
22
Channel List
This section describes how you select TV programmes with your
receiver and how you can set the desired volume.
The description of the functions assumes that the receiver has been
properly connected.
If you wish to connect up the receiver yourself, please read the
“Connection and Setup” section first.
Selecting a TV Programme
Reception Status
The following information describes how to select other programmes
and what the on-screen displays look like.
To select additional TV programmes in ascending or descending order
in the programme memory, simply press the

buttons after turning on
the receiver.
Every time you press the button, an on-screen display shows you the
selected programme together with the time, the programme start and
end times and the programme title on an info bar, provided the
relevant data is being broadcast.
You can permanently show or hide this info bar by pressing the

button.
Encrypted programmes are indicated by the message “Encrypted
channel”:
To view these programmes you will need an authorisation
card - a PCMCIA card or Smartcard - from the Pay TV provider
(see “Common Interface” section).
The CA module and Smartcard are not included in the supply
package.