Kenwood TS-2000 - Manual (Page 101)

93
CONNECTING PERIPHERAL EQUIPMENT
COMPUTER
The COM connector allows you to directly connect a computer or dumb terminal by using an RS-232C cable
terminated with a 9-pin female connector.
No external hardware interface is required between your computer and the transceiver. See “APPENDIX”
{page 113} for information related to this connector.
COM connector
Personal computer/
dumb terminal
RS-232C
serial port
TS-2000(X)/ TS-B2000
Straight cable
COMPATIBLE TRANSCEIVER
When transferring data to or from another TS-2000(X), TS-570, or TS-870S, directly connect the two transceivers
using the COM connectors.
When transferring data to other KENWOOD transceivers, use the optional IF-232C interface unit. Connect the
IF-232C to the ACC 1 connector located on the compatible transceiver.
TS-2000(X) TS-2000(X)/870S/570
TS-2000(X)
Cross-wired cable
Cross-wired cable
See IF-232C manual.
IF-232C
Straight cable
COM Connector
cable
TS-450S/690S/850S/950SDX
ANT
DIN(6P)
RS-232C(25P)
DIN(6P)