Kodak i1800 Series - Manual (Page 61)

A-61555 March 2007 4-9
Replacing the front
blotter strips
Blotter strips collect ink overflow. They should be replaced when there
is a build-up of ink. Replacement blotter strips may be purchased
through your supplier.
1. Open the pod.
2. Use the green tab to lift and remove the ink blotter strip cover to
access the front blotter strips.
3. Carefully pull the blotter strip(s) off the transport. You can replace
one or both of the strips as necessary..
4. Discard the soiled strip(s)
5. Peel the backing away from the blotter strip.
Remove Ink Blotter Strip cover