Kenwood DVF-3070 - Manual (Page 17)

DVF-3070 (EN/E,T,X,Y)
Set Up functions
17
Preparations
3 Press Cursor up/down (5/∞) keys on the remote
to select ANGLE MARK, then press the Cursor
right (
3) key to access the sub features
1 During stop mode, press MENU key on the re-
mote.
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the GENERAL SETUP, then
press the ENTER key to access the sub fea-
tures
4 Press Cursor up/down (5/∞) keys on the remote
to select ON or OFF, then press the ENTER key.
7 Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
MULTI CONTROL
ENTER
MENU
MULTI CONTROL
MULTI CONTROL
MULTI CONTROL
ENTER
MULTI CONTROL
ENTER
Select ANGLE mark ON or OFF
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
Please refer to pages 14 and 15 for setup.
3 Press Cursor up/down (5/∞) keys on the remote
to select OSD LANG, then press the Cursor right
(
3) key to access the sub features
1 During stop mode, press MENU key on the re-
mote.
2 Press Cursor up/down (5/∞) keys on the re-
mote to select the GENERAL SETUP, then
press the ENTER key to access the sub fea-
tures
4 Press Cursor up/down (5/∞) keys on the remote
to select specific language, then press the EN-
TER key.
7 Press Cursor up/down (5/∞) keys on the remote
to select EXIT SETUP, then press the ENTER key.
MULTI CONTROL
ENTER
MENU
MULTI CONTROL
MULTI CONTROL
MULTI CONTROL
ENTER
MULTI CONTROL
ENTER
Select OSD Language
5 Press Cursor left (2) key on the remote to return
to previous menu.
6 Press Cursor up/down (5/∞) keys on the remote
to select MAIN PAGE, then press the ENTER key.
*5357/14-25/EN 03.5.20, 10:24 AM 17