Preparations, Introduction, Before applying power – Kenwood DVF-3070 User Manual

Page 2: Safety precautions, The marking of products using lasers, Caution

Advertising
background image

2

Preparations

DVF-3070 (EN/E,X,Y)

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE
TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) IN-
STRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

Units are designed for operation as follows.

Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

Before applying power

Introduction

Caution : Read this page carefully to ensure safe operation.

CAUTION

R I S K O F E L E C T R I C S H O C K

D O N O T O P E N

The marking of products using lasers

(For countries other than U.S.A. and U.S.-Military)

Inside this laser product, a laser diode classified as Class 2 laser radia-
tion is contained as alerted by the internal caution label shown above. Do
not stare into beam or view directly with optical instruments.
Location: DVD laser pick-up unit cover inside this product

Caution : Read this page carefully to ensure safe operation.

Europe ............................................................................ AC 230 V only
Australia ........................................................................ AC 240 V only
Other countries ........................................................... AC 110

-

240 V

CAUTION

VISIBLE AND INVISIBLE LASER RADIATION

WHEN OPEN. DO NOT STARE INTO THE BEAM OR

VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.

DO NOT PRESS ON THIS SURFACE

The marking this product has been classified as Class 1. It
means that there is no danger of hazardous radiation outside
the product.
Location: Back panel

CLASS 1

LASER PRODUCT

*5357/01-13/EN

03.5.20, 10:24 AM

2

Advertising