Operating your kambrook popcorn factory, Know your kambrook popcorn factory – Kambrook KPC10 User Manual

Page 3

Advertising
background image

Any maintenance other than cleaning
should be performed at an authorised
Kambrook Service Centre.

This appliance is for household use only.
Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats. Do not use
outdoors.

The installation of a residual current
device (safety switch) is recommended to
provide additional safety protection when
using electrical appliances. It is advisable
that a safety switch with a rated residual
operating current not exceeding 30mA be
installed in the electrical circuit supplying
the appliance. See your electrician for
professional advice.

OPERATING YOUR
KAMBROOK POPCORN
FACTORY

Remove all promotional labels and wash
transparent cover and combined
measuring tray/butter dish in hot soapy
water. Dry thoroughly.

Insert the plug into a 240 volt power
outlet an turn the power on.

Fill the combined measuring tray/butter
dish full of corn kernels and pour into the
popping chamber. Do not place more than
one combined measuring tray/butter dish
full of corn kernels into the Popcorn
Factory at one time.

3

1. 1250 watts for quick popping

2. Transparent cover with

popping chute

3. Combination measuring

tray/butter dish

4. Popcorn “popping” chamber

5. On/off switch

6. Non-slip feet

KNOW YOUR KAMBROOK POPCORN FACTORY

2

3

1

4

6

5

Advertising