Kompernass KH 2370 - Manual (Page 24)

24 KH 2370 25 KH 2370
DVD/VCD/S-VCD mode
Playing back DVDs, VCDs or S-VCDs
To play back a DVD/VCD/S-VCD with the combination unit:
1 Ensure that you
• have connected the combination unit properly to the
television and
• all necessary settings have been carried out in the OSD
menu of the combination unit.
2 Switch on the television to which the combination unit
is connected.
3 Switch on the combination unit with the POWER button.
4 Open the tray of the combination unit with the OPEN/
CLOSE button.
5 Insert a DVD/VCD/S-VCD into the disc tray with the la-
belled side upwards.
Note:
DVDs, VCDs and S-VCDs, which you would like to play
back with the combination unit, possibly have a country
code which is printed on the DVD cover.
The combination unit can only play back DVDs/VCDs/S-
VCDs with the country code 2.
If there is no country code printed on the cover of a
DVD/VCD/S-VCD
• but instead the symbol , then the DVD/VCD/S-VCD
can be played back with the combination unit
• then the DVD/VCD/S-VCD can possibly not be played
back by the combination unit. Check this by trying to
play back the DVD.
6 Close the disc tray by pressing the OPEN/CLOSE but-
ton.
7 The contents of the inserted DVD/VCD/S-VCD is now
being loaded; this can last for several seconds.
8 The playback of the inserted DVD/VCD/S-VCD starts
automatically.
Depending on the inserted DVD/VCD/S-VCD, it is possible
that the contents are not played back immediately, as first
of all a disc menu appears on the television screen. The
disc menu allows you e. g.
• to select the language for the subtitles and film sound
• the direct selection of chapters
• the playback of bonus material on the film (back-
ground information, making of etc.)
If a disc menu appears on the television screen:
1 Select the menu item using the control buttons with
which the playback of the DVD/VCD/S-VCD contents is
started.
2 Then press the ENTER button to start the playback.
Also look at chapter “Calling up disc menu” for more infor-
mation on this subject.
Functions when playing back a DVD,
VCD or S-VCD
Note:
The functions described below are perhaps not avail-
able on all DVDs/VCDs/S-VCDs! If you try to carry out
functions which are not available, it is displayed on
the television screen.
During the playback of a DVD/VCD/S-VCD, you can use the
following functions of the combination unit:
To pause playback (Pause)
To pause the playback of the inserted DVD/VCD/S-VCD:
1 During the playback press the PAUSE button. On the
television screen you can see the fixed image of the
scene which has just been paused.
2 To continue the playback, press the PLAY button.
Stopping the playback (Stop)
To stop the playback of the inserted DVD/VCD/S-VCD,
press the STOP button.
Playback stop with resume function
The combination unit automatically saves the position at
which the playback was stopped. This function is called
resume function. If you press the PLAY button once more,
then the playback will continue at the saved position.
Playback stop without resume function
The saved position is deleted if you press the STOP button
a second time. If you press the
PLAY button once more, then the playback starts at the
beginning of the inserted DVD/VCD/S-VCD.