Konica Minolta Digital Revio KD-500Z - Manual (Page 22)

22
Preparing the Power Supply
(Cont’d)
Connecting the AC Adapter (sold separately)
- If you do not want to worry about battery consumption, we recommend using
the specified AC adapter (sold separately, model#DR-AC4) when shooting
pictures, during playback, or when transferring data (USB connection).
- Only use the AC adapter (sold separately) specified for your camera as use of
any other device may result in a breakdown, fire or electrical shock.
- Make sure the camera is OFF, check that the LCD monitor is not lit and turn OFF
all power.
- After reading the “Important Safety Precautions” (pp.7-10) in this manual and
the warnings supplied with the AC adapter, connect the adapter as instructed.
1. Connect the AC adapter to the power supply
cord, and plug in the power supply plug.
2. Insert the connecting plug of the battery type
adapter to the AC adapter plug.
3. After opening the batter y/card cover,
remove the battery sub-cap. Inser t the
battery adapter in the battery compartment,
and close the battery/card cover.
• When finished using the camera, turn OFF the
power supply to the camera, and then
disconnect the connecting plug of the battery-
type plug from the AC adapter.
Never handle the adapter with wet hands. It may
result in electric shock.
1
2
3