Konica Minolta Digital Revio KD-500Z - Manual (Page 27)

27
1. Open the battery/card cover.
2. With the camera and the label of the card facing up, insert the card with
the knocked out part first into the slot and push in until a click is heard.
• Take care that the card is inserted facing the right way. If the card is forcefully
inserted facing the wrong way, it will damage the connector.
• There are two card slots. When a SD Memory card or MultiMedia Card are used,
insert them in the slot at the back of the camera, and if a Memory Stick is used,
insert it in the slot toward the front.
3. Close the battery/card cover.
Inserting a Card
1
Memory Stick slot
SD Memory Card/MultiMedia Card slot
2
Inserting/Removing Cards
(Cont’d)