Kodak DX7630 - Manual (Page 50)

44
7
Troubleshooting
When you have questions about your camera, start here. Additional technical
information is available in the ReadMe file located on the Kodak EasyShare
software CD. For updates to Troubleshooting information, see
www.kodak.com/go/dx7630support .
Camera problems
If... Try one or more of the following
The camera does not
turn on ■ Remove, then reinsert the battery.
■ Insert a charged battery.
■ Place the camera on a Kodak EasyShare camera or printer
dock (sold separately), then try again.
■ Connect the camera to a Kodak 5-volt AC adapter (sold
separately), then try again.
See page 2 for more battery information.
The camera does not
turn off and the lens
does not retract
Camera buttons and
controls do not
function
The camera screen
does not turn on ■ In any capture mode, press the Display/Info button.
■ Turn the camera off, then on again.
To change the camera screen setting so that it is on whenever
the camera is on, see
Liveview (Auto), page 24 .
In Review, a blue or
black screen is
displayed instead of a
picture ■ Transfer the picture to the computer.
■ Transfer all pictures to the computer.
See page 42 .
The pictures
remaining number
does not decrease
after taking a picture ■ Continue taking pictures. The camera is operating
normally.
(The camera estimates the number of pictures remaining after
each picture is taken, based on picture size and content.)
Picture orientation is
not accurate ■ Set the Orientation Sensor ( page 26 ).
Flash does not fire ■ Check flash setting, and change as needed ( page 16 ).
Battery life is short ■ Wipe the contacts with a clean, dry cloth ( page 3 ) before
inserting a battery in the camera.
■ Insert a charged battery ( page 2 ).