Konica Minolta REVIO KD-420Z - Manual (Page 110)

110
Using the Set-up Menu
(Cont’d)
Specifying the LCD Monitor Settings
- Use the procedure below to specify the settings for the LCD monitor.
1. Select “MONITOR”.
2. Use the
̆ or ̄ button to select the
mode.
Then use the SET/DISP. button to turn
each mode ON or OFF.
3. When you have completed the settings,
press the MENU button.
When the settings are completed, the
SET UP menu screen reappears.
2
1
● Available modes
- QUICK VIEW : Allows you to set up the camera so that you can check your
images right after you shoot them.
- INFORMATION : Allows you to switch between showing and hiding the image
information.
- MONITOR : Allows you to change the LCD monitor operation mode.
- BLUE LED : You can turn the LED that lights when the camera is started up
on and off.
- MONITOR COLOR : Allows you to adjust the LCD monitor brightness and color tones.
(p.112)