Konica Minolta REVIO KD-420Z - Manual (Page 51)

51
Erasing Unwanted Images
- You can erase unwanted still pictures, movie images etc. (you can select
one frame, multiple frames or all frames.)
- Once images are erased, they cannot be recovered.
- Protected images (p.101) cannot be erased unless the protection is
removed.
Erasing the Playback Image
1. After pressing the PLAY button, use
̇ or ̈ to select the image you wish to
erase.
• When you are erasing all or some of the
frames, it does not matter which frame is
displayed.
2. When you press the Delete button,
the frame selection screen appears.
Press the
̆ or ̄ button to select “ONE”
(the selected image), “SELECT” or
“ALL”.
• To cancel image deletion, select CANCEL
and press the SET/DISP. button. The step
1screen reappears.
3. When you press the SET/DISP. button,
deletion starts and the “DELETE…”
message appears. When the process
is finished, the display returns to the
playback image.
• If there isn’t any image data, “NO DISPLAY
DATA” is displayed.
• If you selected "SELECT", refer to p.52.
2
1
3