Keys Fitness 2 Person Sauna BS-9202 - Manual (Page 15)

Power On /Off:
Press to control the main power of the sauna unit.
Power indicator: Indicates the status of the sauna’s main power.
Work Start/Stop: Press to control the working functions of the sauna.
Work indicator: Indicate the working status of the sauna.
Heat indicator: Indicate the status of heating functions.
Light:
Press to control the lighting function
Time Display:
Display the heating time of the sauna in minute(s)
Time:
Press to adjust the setting of the timer.
Temperature Display:
Display the actual interior temperature of the sauna room in 0 C/ 0 F.
Temperature:
Press to adjust the temperature setting
0
C/
0
F:
Press to change the temperature display between 0 C or 0 F.
1. MAIN POWER:
Plug in the main power to your household power.
2. SAUNA POWER:
To power on the sauna, press POWER ON/OFF one time on the inside control
panel, POWER light should then light up, The TIME DISPLAY will flash 60. TEMPERATURE
DISPLAY will flash 60. If you press POWER ON/OFF again, power is off, while everything goes out.
3. HEATING TIME:
When power is on, press TIME “▲” or “▼” to increase or decrease the emitting
time of sauna room. When you press one time, it increases or decreases 1 minute. If you press the
set-up button continuously for more than 2 seconds, the digital will change quickly. If you don’t press
the button in more than 5 seconds, the digital will stop flashing, set-up value will be memorized. This
value will be shown when you restart next time.
During sauna session, set-up time will count down the minutes one by one. When the left time is 5
minutes, the equipment will make a warning sound for 15 seconds, at this moment, time display is
flashing. During these 15 seconds, you can press any set-up button to stop warning sound, and
reset up the time of new sauna session. If you don’t set up the time again, after 15seconds, sauna
continues, when display time is 0, the equipment will power off automatically. Particularly the
equipment will also power off if you don’t press any bottom in 5 minutes after you power on the
sauna!
4. Switch between
0
F and
0
C
When power is on, “ 0 C” and “ 0 F” will switch when you press “ 0 C/ 0 F”. And the TEMPERATURE
DISPLAY value will change accordingly.
5. Set up the heating temperature
When you turn the power on, press TEMPERATURE button “▲” or “▼” to increase or decrease the