Keiser 1031 User Manual

Page 9

Advertising
background image

10-5508 Rev A Service Department (800) 888-7009

9

Left side valve

Right side valve

Repeat the process under Step One to mount the second valve.

Step Two: Install single to double adapter and electrical wires

Take all four electrical wires and insert them, one by one, through the rubber grommet,
and then through the hole. Pull all of the slack into the computer system control box.
Replace the grommet in the hole.

Next, install the single to double adapter. Approach the compressor from the front. The
electrical plug and air valve are on the front.

Left side valve

Right side valve

Repeat the process under Step One to mount the second valve.

Advertising
This manual is related to the following products: