Kenwood TK-3131 - Manual (Page 16)

10
e e e e e Select a Channel.
Select a channel from 1 to 15 by pressing the
▲ or ▼ key.
• A confirmation tone sounds each time you
press the
▲ or ▼ key.
• When you receive a call on your selected
channel, you will hear audio from the speaker
and the LED will light green.
• To use a signalling code, refer to “QUIET
TALK/ DIGITAL QUIET TALK” on page 11.
r r r r r Make a Call.
1 Press the MON key to make sure the
channel is not in use (refer to page 16).
2 Press and release the CAL key to alert
the other parties that you are making a
call.
• A calling alert tone will sound on the other
party’s transceiver.
3 Press and hold the PTT switch, then
speak into the microphone to transmit.
• The LED lights red while transmitting.
• For best sound quality, speak into the
microphone in your normal speaking
voice while holding the microphone
approximately 1.5 inches (3 to 4 cm) from
your lips.
4 Release the PTT switch when you have
finished speaking.