Kyocera Xcursion KX160B - Manual (Page 37)

User Guide for the Kyocera Xcursion Phone 31
Erasing all voice tags
To erase all voice name dial recordings in your phone:
1. Select Menu
→
Settings
→
Voice Features
→
Erase Voice Dial .
2. Select Yes .
Calling using digit dialing
When using digit dialing, you speak digits to dial
a phone number.
Note: You cannot speak a string of digits. You must
speak one digit at a time and wait for the prompt.
1. From the home screen, press . The phone
responds: “Say a name or say Dial.”
2. Say Dial . The phone responds: “Speak a digit.”
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
If you pause, the phone prompts you with the
following five options. After the prompt, speak
an option.
– Say
Clear to erase the digit last entered.
The phone responds: “Digit cleared.”
To clear the entire phone number, say
“Clear” again. When the phone prompts you
with “Clear entire phone number?”,
say “Yes” to clear or “No” to cancel.
– Say Call to dial the number.
– Say Verify to cause phone to repeat the set
of digits that you input.
– Say Cancel to exit voice recognizer and
return to the home screen.
– Speak a digit to enter the next digit. Once
the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.
Using voice features with
accessories
You can use voice commands to make a phone call
or to answer the phone only if your phone is
connected to an accessory such as a hands-free car
kit or headset (both sold separately).
Note: The following features apply only to the
installed hands-free car kit unless noted.
To shop for these accessories, visit
www.kyocera-wireless.com/store or call
800 349-4188 (U.S.A. only) or 858 882-1410.
Waking up the phone
If your phone is connected to a professionally
installed Kyocera hands-free car kit, you can use
a voice command to activate the phone to make a
phone call.
To activate the Voice Wake-up setting:
• Select
Menu
→
Settings
→
Voice Features
→
Voice Wake-Up
→
With accessory .
To wake up the phone:
1. Say “ Wake Up” and listen for a tone.
2. Say “ Wake Up” again until you hear two tones.
82-N8671-1EN.book Page 31 Tuesday, October 4, 2005 3:49 PM