Hotpoint Ariston HL 61 IX - Manual (Page 13)

Electrical connection
GB
13
! The mains power supply must correspond to the
rating indicated on the plate situated inside the hood.
If provided with a plug connect the hood to a socket in
compliance with current regulations and positioned in
an accessible area. If it not fitted with a plug (direct
mains connection) or if the plug is not located in an
accessible area apply a bi-polar switch in accordance
with standards which assures the complete
disconnection of the mains under conditions relating to
over-current category III, in accordance with
installation instructions.
IMPORTANT: Before re-connecting the hood circuit
to the mains supply and checking the efficient
function, always check that the mains cable is
correctly assembled.