Kenwood VR-6050 - Manual (Page 12)

12 EN
COAXIAL OPTICAL
CD/DVD
DIGITAL IN
DVD/
6CH
VIDEO
2
Digital connections
The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully.
9
COAXIAL
DIGITAL OUT
(AUDIO)
DOLBY DIGITAL RF
OUT (AUDIO)
LD player
PCM OUT
Setting up the system
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 jack. (See “Connecting video components”.)
RF digital
demodulator
(DEM-9991D)
(sold separately)
CD or DVD player
OPTICAL DIGITAL OUT (AUDIO)
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
Optical fiber
cable
COAXIAL DIGITAL OUT (AUDIO)
Connect the video signal and analog
audio signals to the
VIDEO 2 jacks.
(See “Connecting video components”.)
!
•VR6050/10-18/EN 4/9/02, 4:52 PM 12