Kenwood VR-6050 - Manual (Page 34)

34 EN
Operating other components
This operation lets you operate the registered components.
KENWOOD audio components with system control turn on and off
automatically with the receiver via the system control connections.
SOURCE
RECEIVER
INPUT
SELECTOR
1
Use the INPUT SELECTOR keys to select the component you
desire.
• Pressing the INPUT SELECTOR keys also changes the input selector
on the receiver.
• When you operate your registered DVD player, Cable tuner,
DSS/SAT receiver, VCR or TV, go to step 2.
• When you operate the CD player, Cassette deck, MD player, or
Tuner with system control connection, go to step 3.
2 Press the SOURCE key.
• To return to the receiver operation mode, press the RECEIVER key.
3
Press the operation keys you desire. °
The remote control mode remains at the selected input. If you
wish to operate another component, repeat step
2 or 3.
Note
Be sure to point the remote control at the remote sensor on the
receiver when you want to operate KENWOOD components connected
by system control cords. Otherwise, point the remote control at the
component you want to operate.
Basic remote control operations for other components
•VR6050/28-34/EN 4/4/02, 10:04 PM 34