Kathrein UFS 712sw - Manual (Page 56)

56
Here you can use the

buttons to select the type of video signal at the VCR Scart socket. Select
the signal that your external recorder can process. When doing this, refer to the operating instructions for
your recorder!
• FBAS – Composite baseband signal
(colour/picture/blanking/synchronous signal)
• Y/C – S-Video signal (luminance/chrominance)
VCR SCART SIGNAL OUTPUT
Here, you can use the

buttons to specify whether your TV set is a
• PAL or
• NTSC set.
Here you can use the

buttons to select whether the receiver should automatically output the
Dolby Digital signal (if this is transmitted).
AUTOM. DOLBY DIGITAL OUTPUT
TELEVISION SYSTEM
Here you can use the

buttons to set a delay in milliseconds, if the sound output from your
receiver is out of synch with the TV picture (lip synchronicity). The delay can be set in 10 millisecond
steps from 10 ms up to 200 ms.
AUDIO DELAY
SETTINGS
CONFIGURING THE ON-SCREEN MENU