Kathrein UFS 712sw - Manual (Page 52)

52
PARENTAL CONTROL
Select the “Parental control” menu using the menu button

, the

buttons on the main menu
and . You are now prompted to enter the PIN code (factory default setting: 0000). After entering the
PIN using the keypad you are shown the following display:
Select the parameters to be changed using the

buttons.
BLOCKING THE MAIN MENU
Use the

buttons (On/Off) to select whether the main menu should be blocked. If the menu is
blocked, changes can be made only by entering the four-digit PIN code.
BLOCKING THE RECEIVER
Use the

buttons (On/Off) to select whether the receiver should be blocked. If the receiver is
blocked, it can be operated only by entering the four-digit PIN code after it is switched on (factory
setting: 0000).
Also pay attention to the bars
at the bottom of the on-screen
display! This provides hints on
what to do next.
Press the

button to exit the menu again.