LG PCS100R - Manual (Page 13)

13
206-4142
Troubleshooting / Specifications
Dimensions
Height: 1.692 inches (42.977 mm)
Width: 19.0 inches (482.6 mm) (for EIA standard 19-inch rack mount)
Depth: 8.5 inches (215.9 mm)
Weight: 2.70 pounds (1.22 kgrms) rack-only weight
Environmental Storage Conditions
Temperature: -20° to 70° Celsius
-4° to 158° Fahrenheit
Humidity: 95% non-condensing
Environmental Operating Conditions
Temperature (Tma): 0° to 35° Celsius
32° to 95° Fahrenheit
Humidity: 95% non-condensing
Electrical
DC Input: +12V DC @ 5 Amps
Impedance at ASI Out jack: 75 ohms
Level at ASI Out jack: 800 mv
Ethernet: 10/100/1000BaseT
Note: Design and specifications subject to change without prior notice.
Troubleshooting
If the PCS100R is not connecting to the network, i.e., the IP Address field in the System
Information display (see setup procedure on previous page) is blank:
1. Check the NETWORK connector on the rear panel of the PCS100R. Make sure the cable
connection is tight and secure.
2. Observe the green LED on the NETWORK port. Once the PCS100R is connected to the
network, the LED will be lit continuously.
3. Contact the network administrator to verify the network status.
Specifications