Life Fitness 887 - Manual (Page 10)

STEP 9:
FIGURE 9
10
31
• Place one 3-1/2” PULLEY (9) into the loop of the CABLE (12) below the second and third PULLEY of the TOP BOOM (4) as shown
in FIGURE 9.
• LOOSELY assemble two 3/16 X 1-3/4 X 5-1/4” PLATES (23) to each side of the 3-1/2” PULLEY (9) using one 3/8 X 2” BOLT (35),
two 3/8” WASHERS (30), and one 3/8” LOCK NUT (31). See FIGURE 9.
• Attach the CABLE (11) from the TOP BOOM (4) to the CARRIAGE (6) using one 1/4” QUICK LINK (36) as shown in FIGURE 9.
(IMPORTANT! Securely tighten QUICK LINK.)
!IMPORTANT!
SECURELY
TIGHTEN
35 3/8 X 2”
36
4
30
23
11
9
6