Logitech Harmony 1000 - Manual (Page 8)

User Manual Harmony 1000
Activities
An Activity refers to the common uses you have for your devices. For example, a common use for a TV
is to watch TV shows; a common use for a DVD player is to watch movies.
Harmony uses the term Activity to refer to a group of devices you use in order to watch TV, a movie, and
many other uses. In this way, if you watch movies using your TV, DVD player, and a stereo receiver (for
sound), you can create an Activity called Watch a DVD.
The Activity will store information on the devices you need to watch a DVD—in this case, your TV, DVD
player, and stereo receiver—and the specific settings for each device (e.g. TV must be set to the Video 1
input, the DVD player must be on, and the stereo receiver set to play sound for the DVD).
Creating Activities
To create Activities you must install the software from the CD that was packaged with the remote, or from
the Logitech web site. Once you have installed the software, you will be prompted to create a member
account so that you can store your information about the devices in your home entertainment center and
the settings for each Activity you create.
After you have created an account, the software will guide through a step-by-step process that will ask
you questions about the type of devices you have (manufacturer and model information), and how you
want to use and control them.
Selecting an Activity on the Remote
View the Activities you have added by pressing the Activities button. The display will then list the
Activities you have added. Press the Activity you want to start.
As a default, when you select an Activity, you will see a message on the remote’s display reminding you
to keep the remote pointed at your entertainment system while the Activity starts. This helps ensure that
all infrared (IR) signals are properly sent.
v. 1.0 page 6